PNC/DXY/GRX/GSX/LTX/RSX/PLX/RP/CT/CM/PC
These drivers were OEM'd to Roland from AutoCAD for use on the plotter/cutter systems current up to approximately 1999. These drivers need the full AutoCAD versions to be installed. AutoCAD LT users needed to use the Roland Windows Plotter drivers instead.
The following models were directly supported. CT/CM/PC models could also use these drivers.
- DXY-1100/1200/1300, 1150/1250/1350
- DPX-2500/260/2700/3500/3600/3700, 4600/4600A/4700LS
- GRX-300AR/AG, GRX-400AR/AG, GRX-350/450/310/410/3500/4500
- GSX-3000/4000
- LTX-320/321,420,2121/2141,2341,2441
- RSX-340/440
- PLX-140/160
- PNC-900/950/1000/1000A/1100/1200/1800/1850/1600/1610/1900/2000/2100/2100A/2200/2200A/2500/2700/3000/3100
- RP-11/12/21/22
ADI Drivers
- ADI 4.2 Autocad R12 DOS 19990312: adi_4.2_autocad_r12_dos-v1.081.exe
- ADI 4.2 Autocad R12 DOS 19950411: autocad_12_dos_drivers_19950411.exe
- ADI 4.2 Autocad R12 WIN 19990312: adi_4.2_autocad_r12_win-v1.121.exe
- ADI 4.2 Autocad R12 WIN 19950411: autocad_12_win_drivers_19950411.exe
- ADI 4.2 Autocad R13 DOS 19990312: adi_4.2_autocad_r13_dos-v1.081.exe
- ADI 4.2 Autocad R13 DOS 19950411: autocad_13_dos_drivers_19950411.exe
- ADI 4.2 Autocad R13 WIN 19990312: adi_4.2_autocad_r13_win-v1.011.exe
- ADI 4.2 Autocad R13 WIN 19950411: autocad_13_win_drivers_19950411.exe
- ADI 4.2 Autocad R14 WIN 19990312: adi_4.2_autocad_r14_win-v1.011.exe
