Setting the Origin
The origin point can be set arbitrarily using the
ORIGIN key.
You can use the material with minimal waste by setting the origin to an uncut
position of the material.
- Load the material in the machine, and make it ready for cutting (setup
condition).
Reference:Loading
the Material
Use the cursor keys to move the cutting
carriage to the desired position.
- Align the center of the blade to the position you wish to make the
origin.
- Hold down the ORIGIN key for one second or longer.
ORIGIN SET appears and the text flashes.
![](image/re_menu_gif/000.gif)
When the setting is complete, the following screen appears.
![](image/re_menu_gif/001_2.gif)
- Send the cutting data from the computer.
Cutting is performed using the specified origin.