**********************************************************************
         Service Tool  [ Peck4.exe ] for Windows XP/2000    v4.0
**********************************************************************

Supporting models
  - ProII Series ( Parallel / Network )
  - ProIIV Series ( Network )
  - AJ-1000 ( Network )
  - SP-300/300V ( USB )
  - FLJ-300 ( USB )
  - SP-540V ( USB )
  - SJ-1000/1045 ( Network )
  - XC-540 (Network)

This programe is possible to do the followings. 
  1. Communicate to Inkjet machine via parallel port or Network port or USB port.
  2. Read the system & History Report from an Inkjet machine, display it and also 
     save it to file.
  3. Read the system parameter from an Inkjet machine, save it to file 
      and also send it to machine.
  4. Set the Head Rank of each head on Peck and then send it to machine.
  5. Upgrade the firmware.
  6. Restart the print server when communicating via network.

How to Install:
 Not necessary to install this tool. Just double click this tool.

How to Uninstall:
 Delete the peck.exe and also peck.ini which is created under the [Windows] directory.
 This tool doesn't use any registory.

To communicate with the machine:
 It is necessary to turn on the Primary Power SW and turn off the Secondary Power SW when
 communicating with the machine. This tool cannot communicate with the machine if the 
 Secondary Power SW is on.

How to upgrade the firmware:
 Click "Firmware Upgrade" and select the firmware file, then click Open to send it to the
 machine. It is not necessary to enter the firmware upgrade mode. It can be done with the
 Primary Power SW ON and the Secondary Power SW OFF.

Note:
ProII series / SJ-1000 / SP-540V
- Firmware version of ProII series needs to be 2.00 and above to use this tool.
- If you use this tool via parallel port on Windows 2000 or Windows XP, please stop 
  the [Print Spooler] service from [Service] < [Administrative Tool] < [Control Panel].
  After communicating, start the [Print Spooler] service.
SP-300 / FLJ-300
- It is necesary to install the SP-300 Windows Driver to use this tool.